On this project we cut a new door opening through a RC wall in a basement for access to a plant room. The building was completed and live...

Our buildersworks teams have been forming new services penetrations through masonry walls and rebuilding tops of existing walls at our...

We have successfully cut out a section of RC structure using our Hilti Hi-frequency track saw and installed a steel framed 'goal post' to...

We have successfully installed some very large beams to support the underside of an RC structure. These beams were 6m long and weighed...

We have successfully completed the stitch drilling, track sawing and removal of concrete to form pile caps within a basement ready for a...

We have placed an advert along side one of our clients in Total Construction Magazine which hopefully has an outreach of over 100k readers!

On this project we have cut and formed openings for new staircase openings through the 1st floor slabs.

We have renewed our fleet of vehicles to comply with the latest ULEZ guidelines and also applied new signwriting!

At a recent project we fabricated and installed a Steel Frame Gantry over a ground floor extension so scaffolding and a hoist can be...

Here we cut 25x25mm chases using dust controlled equipment into a concrete floor for a domestic customer for underfloor heating pipes....

We are pleased to have gained a SMAS Worksafe certificate (www.smasltd.com). This means that we have met the SSIP core criteria...

Here we saw cut and demolished a wall and installed a steel 'goalpost' frame in its place to create an open plan office entrance. This...

Normally openings like this would be saw cut, however this project didn't have the required 3 phase power and wanted to keep the noise to...

We have successfully pumped and placed all of the concrete slabs to a former Water Tower. This conversion will produce a stunning...

Our skilled operatives have been carrying out over 100 repairs to existing RC structural beams at our London Refurbishment Project. Using...

By using our Track Saw we cut through this heavily re-enforced 300mm thick concrete wall to reduce it height by 300mm. A Total of 16lm...

A recent project in Holborn where we have created circa 400no penetration's through the structural beams for future exposed services....

A recent project for a well known car manufacturer to install heavy duty ACO drains to an existing floor. Saw cutting and breakout and...

Our new HILTI set up featuring the water recycling unit working a treat on one of our sites, a lot less water needed and it separates the...

Something a little different, hydraulic jacking of deflecting slabs for support posts to be installed!! Repeated the process for 15...